Grease Lubrication System Radial Lubricator for Oil & GreaseThe grease lubrication
systems include manual grease pumps, pneumatic grease pumps and radial
lubricator. These systems are efficient in operation, high in
performance and easy to operate. These products have been specially designed and developed for greasing of different parts of machineries. These products are available at economical prices.
|
» Radial Lubricator (Grease / Oil)
Models DMRL - 5-6
Reservoir Cap. 5 ltr., Number of
Outlets of Plunger Pump-6 nos. Maximum Pr. 250 Kg/ Cm², Motor .25 HP/ 1.8
kw, 3 Phase, 415V, AC, 1340 RPM, Foot Mounting, Output max. 0 to
0.25 cc per stroke (adjustable) at each outlet independently.
DMRL- 15-6
Reservoir Cap. - 15 Ltr., Number
of Outlets of Plunger Pump- 6 Nos. Maximum Pr. 250 kg/Cm², Motor .25 HP/
1.8 kw, 3 Phase, 415 V, AC, 1340 RPM, Foot Mounting, Output max.
0 to 0.25 cc per stroke (adjustable) at each outlet independently.
DMTL 15-12
Reservoir Cap. 15 Ltr., Number
of outlets of Plunger Pump- 12. Nos. Maximum Pr. 250 Kg/ Cm², Motor.25
HP/.18 Kw, 3 Phase, 415V. AC, 1340 RPM. Foot Mounting, Output
max. 0 to 0.25 cc per stroke (adjustable) at each outlet
independently.
Note: Rreservoir Cap. & No. of Plunger Pump can be
increased or decreased as per customer requirement
|
|
 |
|
|
» Pneumatic Grease Pump
Model DPn GP-1500-6
Reservoir Cap. -1500 cc, Discharge
- 0 to 6 cc per Stroke (adjustable) max. Pressure - 150 kg / Cm²,
Reservoir imported Acrylic (Transparent), Outlet port Size - 1 / 4" BSP. |
|
|
|
» Progressive Block (Grease/Oil)
Models DPB - 4555-N-0
Models DPB - 6080-N-0
* N = Number of middle elements.
* O = Number of outlet points. |
|
|
|
» Plunger Pump Element Assembly
Discharge 0 to 0.25 cc / stroke
(Adj.) Max. Pressure 250 Kg / Cm², Mounting Thread M22 x
1.5 |
|
|
|
» Grease Feeder
DGF – 100 Reservoir Capacity :
100 gms.
DGF – 250 Reservoir Capacity : 250 gms.
DGF – 500 Reservoir Capacity : 500 gms.
|
|
|
|
Manual Grease Pump
Model DMH - GP-500-3
Reservoir Cap- 500 cc,
Discharge 3cc per stroke
Maximum Pressure - 50 kg/Cm2
Model DMH - GP-1000-4
Reservoir Cap- 1000 cc,
Discharge 4cc per stroke
Maximum Pressure - 80 kg/Cm2
Model DMH - GP-1500-6
Reservoir Cap- 1500 cc,
Discharge 6cc per stroke
Maximum Pressure - 100 kg/Cm2
|
|
Lubrication Accessories
Dropco has developed various types of lubrication accessories. Different models of metering injectors and manifolds have been mentioned here in both brass as well as M.S. Housing. All these accessories are durable and available at economic prices.
|
|
» Metering Injectors
DMI-1 with Dosage 0.01 cc, 0.03 cc, 0.05
cc, 0.10 cc, 0.16 cc Per Stroke
DMI -2 With Dosage 0.25 cc, 0.40 cc Per Stroke.
DMI -3 With Dosage 1.00 cc, 1.60 Per Stroke
Note: Above metering injectors
are available in M.S. as well as brass with honed bore Nitrile
rubber parts & accurate dosage.
|
|
|
|
» Manifolds (For DMI - 1 & DMI
-2 Injectors)
DM- 1 One Way ( for Single Injector)
DM- 2 Two Way ( for two Injectors)
DM- 3 Three Way ( for three Injectors)
DM- 4 Four Way ( for four Injectors)
DM- 5 Five Way ( for five Injectors)
DM- 6 Six Way ( for six Injectors)
DM- 7 Seven Way ( for seven Injectors)
DM- 8 Eight Way ( for eight Injectors)
DM- 9 Nine Way ( for nine Injectors)
DM- 10 Ten Way ( for ten injectors)
|
|
|
|
Copyright
© Dropco Multilub Systems Private Limited All Rights
Reserved 
